大家都知道混凝土攪拌機的正常運行離不開各個部件的加持,如果其中一個部件出現問題,那么很有可能會對整個設備造成不好的影響,那么混凝土攪拌機的減速機噪聲大是故障嗎?這是很多人都想知道的問題。
We all know that the normal operation of the concrete mixer is inseparable from the support of each component. If one of the components has a problem, it is likely to have a bad impact on the whole equipment. Is the noise of the reducer of the concrete mixer a fault? This is a question that many people want to know.
減速器是混凝土攪拌機工作的關鍵內容,其工作質量的好壞直接影響著整體施工效益的高低。當前的混凝土攪拌機施工過程中,減速器非常容易出現噪聲和高溫故障,上述故障在一定程度上影響了混凝土攪拌機的使用。
Reducer is the key content of concrete mixer, and its working quality directly affects the overall construction benefit. In the current construction process of concrete mixer, the reducer is very prone to noise and high temperature faults, which to a certain extent affect the use of concrete mixer.
混凝土攪拌機減速機產生內部噪音的原因主要包括兩個方面。一是在使用過程中減速機內部出現異物。這種異物使混凝土攪拌機減速機在使用過程中發生碰撞或摩擦,產生劇烈的噪音。
The reasons for the internal noise of concrete mixer reducer mainly include two aspects. First, foreign bodies appear in the reducer during use. This foreign body makes the concrete mixer decelerator collide or friction in the process of use, resulting in violent noise.
二是減速機軸承損壞。減速機軸承作為混凝土攪拌機減速機的重要組成部分,直接關系到其正常使用效果。減速機軸承損壞極有可能在接頭處產生摩擦,從而產生巨大的噪音,導致零件損壞或報廢。
Second, the reducer bearing is damaged. As an important part of concrete mixer reducer, reducer bearing is directly related to its normal use effect. Reducer bearing damage is likely to produce friction at the joint, resulting in huge noise, resulting in parts damage or scrap.
在修復減速機異物故障的過程中,操作人員必須停止混凝土攪拌機,徹底清理混凝土攪拌機減速機內的異物。清洗時,操作人員應將減速機拆開檢查,對有異物的區域進行檢查,觀察零件有無損壞。
During the repair process, the operator must stop the concrete mixer and thoroughly clean the concrete mixer. When cleaning, the operator should disassemble the reducer for inspection, carry out a comprehensive inspection of the area with foreign bodies, and observe whether the parts are damaged.
在維修減速機軸承故障的過程中,操作人員應觀察軸承的損壞部位,分析軸承可能產生的巨大噪音,觀察軸承的摩擦情況。傳統減速機的噪音具有非常高的均勻性,整體噪音很小。當軸承損壞時,噪聲增大并波動,會產生一定的頻率。經檢查,如發現軸承損壞,應及時更換軸承。
In the process of repairing the fault of the reducer bearing, the operator should observe the damaged part of the bearing, analyze the huge noise that the bearing may produce, and observe the friction of the bearing. The noise of traditional reducer has very high uniformity and the overall noise is very small. When the bearing is damaged, the noise increases and fluctuates, resulting in a certain frequency. After inspection, if the bearing is found damaged, the bearing should be replaced in time.
所以可以得知,混凝土攪拌機的減速機噪聲大一定程度上可以算得上是一種故障,上面的內容告訴了我們噪聲大出現的原因以及維修方法,接下來您可以自己嘗試下噪聲大的故障,當然如果不了的話隨時聯系我們
http://www.gdfcx.net為您解惑。
Therefore, it can be known that the concrete mixer reducer noise to a certain extent can be regarded as a fault, the above content tells us the cause of the noise and maintenance methods, then you can try to solve the fault of the noise, Of course, if not, feel free to contact us at http://www.gdfcx.net for your clarification.