混凝土攪拌機如果使用過程中出現不當的操作，那么不僅會導致有非正常的消耗，還會危及到操作人員的，所以攪拌機的行駛要多加注意才是。那么混凝土攪拌機的行駛要多關注什么？

　　If improper operation occurs in the use of concrete mixer, it will not only lead to abnormal consumption, but also endanger the safety of operators, so the driving of the mixer should pay more attention to it. So what should the concrete mixer pay more attention to?

　　選擇在更好的道路上行駛

　　在道路養護施工區行駛時，應采用低速選擇路面的方法，以免對輪胎造成過大沖擊，甚被刺傷或刮傷；在崎嶇不平的道路上行駛時，要選擇路面，以減少輪胎與路面的摩擦。避免損壞零件和輪胎的沖擊；其次，減速行駛，避免輪胎顛簸和強烈震動；通過泥濘地區時，應選擇堅固、不滑的地方通過，以免輪胎下沉、空轉、發熱嚴重，輪胎和側壁上的嚴重割傷和劃痕。

　　Choose to drive on better roads

　　When driving in the road maintenance construction area, the method of selecting the road surface at low speed should be adopted so as not to cause too much impact on the tires, or even be stabbed or scratched; When driving on bumpy roads, the road surface should be selected first to reduce the friction between tires and the road surface. Avoid shocks that damage parts and tires; Second, slow down to avoid tire bumps and strong vibration; When passing through muddy areas, a firm and non-slippery place should be selected to avoid tire sinking, idling, serious fever, serious cuts and scratches on tires and side walls.

　　停車理應選擇平地

　　應該避免將車輛停放在有粗大、尖銳或鋒利石子的路面上。車輛不要停放在靠近或接觸有石油產品、酸類物質及其它影響輪胎橡膠變質的物料的地方。攪拌車駕駛員盡量不要在停車后轉動方向盤，這樣會加速輪胎的磨損。

　　Parking should be on flat ground

　　Parking vehicles on roads with large, sharp or sharp stones should be avoided. Vehicles should not be parked near or in contact with petroleum products, acids and other materials affecting tire rubber deterioration. Mixer drivers try not to turn the steering wheel after parking, which can accelerate tire wear.

　　合理控制行駛速度

　　混凝土攪拌機在轉彎時，需要根據彎道的路況和轉彎半徑適當減速。由于慣性力和離心力的作用，會加速單邊輪胎的磨損；車輛下坡時，應根據坡度的大小、長度和路況進行控制。適當的車速，使您可以避免或減少使用緊急制動，減少輪胎磨損；車輛在中途停站時，要養成滑行的習慣。

　　Control driving speed reasonably

　　When the concrete mixer is turning, it needs to slow down appropriately according to the road condition and turning radius of the bend. Because of inertia force and centrifugal force, will accelerate the unilateral tire wear; When the vehicle goes downhill, it should be controlled according to the size, length and road condition of the slope. Appropriate speed so that you can avoid or reduce the use of emergency braking, reduce tire wear; When vehicles stop in the middle of the station, to develop the habit of safe coasting.

　　避免突然剎車

　　起步不要太快，避免頻繁使用剎車和緊急剎車，以免因輪胎和地面阻力而加速胎面磨損；提速并注意路面、行人、車輛動態，做好剎車準備，減少頻繁剎車，避免緊急剎車，從而減少輪胎磨損；遇到不可避免的碎玻璃時，減速通過，不要急剎車，因為急剎車會增加壓力，玻璃碎片更容易刺破輪胎。

　　Avoid sudden braking

　　Start not too fast, avoid frequent use of brakes and emergency brakes, so as not to accelerate tread wear due to tire and ground resistance; Speed up and pay attention to the road, pedestrians, vehicle dynamics, ready to brake, reduce frequent braking, avoid emergency braking, thus reducing tire wear; When there is inevitable broken glass, slow down and do not slam on the brakes, because slamming on the brakes increases pressure and glass fragments are more likely to puncture the tire.

　　混凝土攪拌機的行駛要多關注什么？還有很多方面需要關注，在這里不一一說了。如果您對此有疑惑或者有想要了解的內容，您可以點擊網站www.gdfcx.net來向我們的客服人員咨詢。

　　What should the concrete mixer pay more attention to? There are many other areas of concern, which I will not mention here. If you have any questions or want to know more, you can click on the website www.gdfcx.net to consult our customer service staff.