實際上，在使用小型攪拌機的過程中不能夠忽視的一些重要問題，只有認真多注意才能讓攪拌機受傷害程度大幅度減少，那么夏季如何才能減少小型攪拌機受傷害程度？

　　In fact, in the process of using small blender can not be ignored some important issues, only serious attention can make the blender greatly reduced the degree of injury, then how to reduce the degree of injury of small blender in summer?

　　夏季氣溫不斷升高，給機械制造行業帶了一定影響，小型攪拌機的生產也一樣會受到影響。高溫使鋼板發熱，小型攪拌機及其配套的部件，大部分得用鋼板焊接，給操作人員帶來了一定的隱患，告誡操作人員在使用電氣焊干活時一定要戴好護具，避免不必要的傷害。

　　Rising summer temperatures have affected the machinery industry, as well as the production of small mixers. High temperature makes steel plate heat, small mixer and its supporting parts, most of them have to be welded with steel plate, which brings certain safety risks to operators. Experts warn operators to wear protective gear when using electric welding to avoid unnecessary damage.

　　再者，夏季多雨，小型攪拌機的表面需要進行防銹、油漆處理，油漆師傅需要忍受比常溫更高的溫度來對小型攪拌機進行表面處理，非常辛苦。在高溫環境中，小型攪拌機生產車間的操作人員同樣面臨高溫的考驗。生產車間內部受太陽暴曬，加上焊接設備發出的熱量導致車間溫度升高，嚴重影響到工人的生產效率。

　　Furthermore, it is rainy in summer, and the surface of the small mixer needs to be treated with rust prevention and paint. The paint master needs to endure higher temperature than normal temperature to carry out surface treatment of the small mixer, which is very hard. In the high temperature environment, the operators of small mixer production workshop also face the test of high temperature. Exposure to the sun inside the workshop, coupled with heat from welding equipment, leads to elevated workshop temperatures, which seriously affect the productivity of workers.

　　對此做出了相應的措施，排氣扇全部開開，房頂蓋上遮陽網，以此來降低車間溫度，其實大家在使用小型攪拌機的過程中如果按照正確的方法操作的話是完全不用擔心會產生一些意外的事故的，能夠有效的保障它的運行問題，因此相關事項需要提前制定好。

　　The corresponding measures to respond to all open, exhaust fan cover roof sun-shade net, in order to lower the temperature in the workshop, in fact everyone in the process of using small mixer if according to the correct method of operation is completely don't have to worry about will produce some unexpected accident, can effectively ensure the safe operation of the it problem, thus related issues need to be set in advance.

　　夏季的高溫還是會對小型攪拌機的生產有多多少少的影響，所以會從很多方面做好相應的預防工作，這樣的話攪拌機以及人員的才會有保障，更多內容就來網站www.gdfcx.net看看吧。

　　The high temperature in summer will still have a lot of influence on the production of small mixers, so the corresponding prevention work will be done from many aspects, so that the safety of mixers and personnel can be guaranteed. For more information, please visit www.gdfcx.net.