攪拌機主要使用在工程建筑中，在這樣惡劣的環境中，對攪拌機的影響是非常大的，比如攪拌機的輪胎，那么小型攪拌機的輪胎容易發生什么問題呢？

The mixer is mainly used in engineering buildings. In such a harsh environment, the impact on the mixer is very large. For example, the tires of the mixer. What problems are likely to occur with the tires of the small mixer?

攪拌機輪胎材料選用？

Mixer tire material selection?

攪拌機輪胎一般為鋼絲胎、纖維胎和尼龍胎，如何匹配合適的攪拌機機輪胎將對您的愛機的性能有直接的影響。許多駕駛員并不了解自己的攪拌機上用的或準備購買的是什么類別的輪胎。

Mixer tires are generally steel wire tires, fiber tires and nylon tires. How to match the appropriate mixer tires will have a direct impact on the performance of your favorite machine. Many drivers do not know what kind of tires they are using or preparing to buy on their mixers.

如果同一輛機上用了不同胎體的輪胎，會影響機的使用性能。因此，在換輪胎時好先了解一下自己機上使用的是什么胎體的輪胎，如果是半鋼絲的，仍然選用半鋼絲的，如果是全纖維的，就仍然選用全纖維的。

If tires with different carcasses are used on the same vehicle, the service performance of the vehicle will be affected. Therefore, when changing the tire, it is better to know what kind of tire body is used on your machine. If it is half steel wire, it is still half steel wire. If it is full fiber, it is still full fiber.

攪拌機如何造蹭胎壁？

How does the mixer rub against the tire wall?

很多時候，蹭胎壁是在攪拌機靠邊時無意中造成的，可能是司機機感不佳，也可能是司機開小差。攪拌機輪胎側面屬于輪胎的薄弱部位，磨損嚴重的話也會造成輪胎鼓包，帶來爆胎的隱患。因此，司機在靠邊停機的時候，應該多留心攪拌機與路肩的距離，避免蹭胎壁。

Most of the time, the rubbing of the tire wall is caused unintentionally when the mixer pulls aside, which may be caused by the driver's poor sense of machine or the driver's desertion. The side of the mixer tire is the weak part of the tire. If the tire is seriously worn, it will also cause the tire bulge and bring the hidden danger of tire explosion. Therefore, the driver should pay more attention to the distance between the mixer and the road shoulder to avoid rubbing against the tire wall when pulling over to stop.

攪拌機輪胎偏磨現象？

Mixer tire eccentric wear phenomenon?

很多人認為攪拌機輪胎的偏磨是機輪的外傾角超差造成的，但其實輪胎的偏磨在很大程度上是因前束值的超差造成的，根據從事四輪定位工作多年的技術人員總結的經驗和大量的定位檢測數據分析認為：正確的前束值完全可以有效的避免輪胎的偏磨。

Many people think that the eccentric wear of the mixer tire is caused by the out of tolerance of the camber angle of the wheel, but in fact, the eccentric wear of the tire is largely caused by the out of tolerance of the toe in value. According to the experience summarized by the technicians engaged in four-wheel positioning for many years and the analysis of a large number of positioning detection data, it is believed that the correct toe in value can effectively avoid the eccentric wear of the tire.

還有一種輪胎偏磨是轉向輪大總轉角的超差、機輪外傾角和主銷傾角的不正確導致的，攪拌機在實際的行駛中，大多數是直線行駛的，轉彎、倒機和掉頭時的大總轉角的時間不多，所以由此引發的偏磨比較少。

Another kind of tire eccentric wear is caused by the out of tolerance of the large total angle of the steering wheel, the incorrect camber angle of the wheel and the kingpin angle. In the actual driving of the mixer, most of them are straight-line driving, and the time for the large total angle of turning, reversing and turning is not much, so the eccentric wear caused by this is relatively small.

小型攪拌機的輪胎容易發生什么問題？我們在這里從三個問題來講解完畢，總之攪拌機的輪胎還是很重要的，平時要多注意輪胎問題，做好攪拌機輪胎的保養。更多事項就來我們網站http://www.gdfcx.net進行咨詢吧。

What problems are easy to happen to the tires of small mixers? Here, we will finish the explanation from three questions. In short, the tire of the mixer is still very important. We should pay more attention to the tire problem and do a good job in the maintenance of the tire of the mixer. For more information, please visit our website http://www.gdfcx.net Let's consult.