The temperature of the automatic concrete mixer will rise naturally in the long-term operation, but it will damage the equipment if it exceeds the temperature that the equipment can bear. Therefore, if the equipment temperature is too high, corresponding maintenance work must be carried out.

1.防止發動機過熱：由于相對較高的環境溫度，發動機容易過熱。發動機冷卻系統的檢查和維護需要加強。這包括檢查水箱，恒溫器，水泵，風扇等。注意冷卻水。當水溫超過100°C時，在陰涼處停下來冷卻，讓發動機空轉，打開引擎蓋并散熱。

1. Prevent the engine from overheating: due to the relatively high ambient temperature, the engine is easy to overheat. The inspection and maintenance of engine cooling system need to be strengthened. This includes checking the water tank, thermostat, water pump, fan, etc. Pay attention to the cooling water. When the water temperature exceeds 100 ° C, stop in the shade to cool, let the engine idle, open the hood and heat.

2.防止發動機爆燃：夏季氣溫很高，可能超過35°C，在這種季節，一些零件老化的汽車自燃的可能性要高得多。會更高。為預防做準備。

2. Prevent engine deflagration: the temperature is very high in summer, which may exceed 35 ° C. in this season, the possibility of spontaneous combustion of some aging parts is much higher. It will be higher. Prepare for prevention.

3.防止汽車漆面損壞：汽車漆面在暴露于強烈陽光下會陳舊且起皺，正常的美容蠟可發揮一定的防曬作用，但對汽車蠟由于鉍成分，紫外線輻射會使油漆生銹，并留下小的黑點。車蠟本身不能提高硬度和防紫外線性能，但會由于高溫而迅速消失。停車時，請小心將車停在陰涼處。

3. Prevent the damage of automobile paint: the automobile paint will be old and wrinkled when exposed to strong sunlight. The normal beauty wax can play a certain role in sun protection, but for the car wax, due to bismuth composition, ultraviolet radiation will rust the paint and leave small black spots. Car wax itself can not improve the hardness and anti ultraviolet performance, but it will quickly disappear due to high temperature. When parking, please park carefully in the shade.

4.防止汽車輪胎破裂：高溫，不易刺穿，太高的溫度容易使輪胎變形并降低拉伸強度。由于輪胎本身不是標準輪胎，氣壓也不是標準輪胎，輪胎老化，性能下降，或者在行駛過程中輪胎滾動成硬質金屬或其他硬物，汽車突然爆裂。

4. Prevent automobile tire from cracking: high temperature, not easy to pierce, too high temperature is easy to cause tire deformation and reduce tensile strength. Because the tire itself is not a standard tire and the air pressure is not a standard tire, the tire aging, performance degradation, or when the tire rolls into hard metal or other hard objects during driving, the car suddenly bursts.

5.防止發動機潤滑故障。較高的溫度導致較低的油粘度，較低的抗氧化性和潤滑不良。因此，請始終檢查機油的質量并及時添加或更換。及時清潔機油濾清器和散熱器，以確保機油暢通并散熱良好，并避免發動機過載。

5. Prevent engine lubrication failure. Higher temperatures result in lower oil viscosity, lower oxidation resistance and poor lubrication. Therefore, always check the quality of the oil and add or replace it in time. Clean the oil filter and radiator in time to ensure that the oil is smooth and heat dissipation is good, and avoid engine overload.

6.防止制動制動器故障：高溫環境中的制動液很可能蒸發，在制動管中形成空氣阻力，容易磨損制動蹄，從而導致制動故障。因此，制動系統需要經常檢查和調整，但是在長坡上，必須注意制動器的駐車以確保良好的制動性能。如果發現制動輪轂很熱，請停止并冷卻制動輪轂，但不要倒入冷水以防止制動輪轂破裂。

6. Prevent brake failure: the brake fluid in high temperature environment is likely to evaporate and form air resistance in the brake pipe, which is easy to wear the brake shoes and cause brake failure. Therefore, the brake system needs to be checked and adjusted frequently, but on long slopes, attention must be paid to the parking of the brake to ensure good braking performance. If it is found that the brake hub is very hot, stop and cool the brake hub, but do not pour in cold water to prevent the brake hub from cracking.

混凝土自動攪拌車高溫下的維護了解就是這樣，希望對你有幫助

Automatic concrete mixer truck maintenance under high temperature understanding is this, hope to help you
混凝土自動攪拌車