When we walk on the main road, we will encounter the concrete mixer more or less. We see that it is constantly rotating and mixing cement on the road. Some people will ask why it is necessary to mix without working? Won't this increase the chance of car damage? Let's talk about why the concrete mixer is in such a state.

作為一種運送或者攪拌建筑用混凝土的專用卡車，混凝土攪拌車無疑給建筑工人們省了許多事。只需要將水泥、水、砂石等建筑材料放到攪拌罐中，在攪拌裝置的作用下，攪拌罐正轉，混凝土沿罐子內部的螺旋葉片向里運動將材料混合均勻，然后再反轉攪拌罐，混凝土便沿著葉片向外卸出。

As a special truck for transporting or mixing construction concrete, concrete mixer undoubtedly saves a lot of things for construction workers. Just put the cement, water, gravel and other building materials into the mixing tank. Under the action of the mixing device, the mixing tank rotates forward, and the concrete moves inward along the spiral blade inside the tank to mix the materials evenly, and then reverse the mixing tank, and the concrete will be discharged outward along the blade.

混凝土攪拌車

Concrete mixer

然而干過工程的人都知道，混凝土一旦長時間靜止，就很容易固化成塊，當周圍有東西時，會牢牢地黏在上面，一旦干了之后，很難去除，因此即使是運送已經攪拌好的混凝土，攪拌車也會不停地轉動，以防止混凝土粘在攪拌罐內占用空間，減少攪拌罐的容積。而在使用攪拌車運送混凝土的時候，攪拌罐也會采用回轉密封技術，將攪拌車的進出料口牢牢密封住，減少水份蒸發，從而進一步水泥固化的問題。

However, people who have worked in the project know that once the concrete is stationary for a long time, it is easy to solidify into blocks. When there is something around, it will firmly stick to it. Once it is dry, it is difficult to remove it. Therefore, even when transporting the mixed concrete, the mixer truck will keep rotating, so as to prevent the concrete from sticking in the mixing tank, occupy space and reduce the volume of the mixing tank. When the mixer truck is used to transport concrete, the mixing tank will also adopt rotary sealing technology to firmly seal the inlet and outlet of the mixer truck to reduce water evaporation, so as to further solve the problem of cement solidification.

同時，為了延長攪拌車的壽命，在每次裝料前，都需要用水沖洗進料口，使進料口在裝料時保持濕潤。到工地卸料后，人們還需要對出料槽以及攪拌罐記性清洗，一般的方法是往內加清洗用水，然后在車輛回程時，保持混凝土攪拌罐慢速轉動。當然有時也會在運輸途中進行干料攪拌以清洗系統。

At the same time, in order to prolong the service life of the mixer truck, it is necessary to flush the feed inlet with water before each loading to keep the feed inlet wet during loading. After unloading at the construction site, people also need to remember to clean the discharge tank and mixing tank. The general method is to add cleaning water, and then keep the concrete mixing tank rotating slowly when the vehicle returns. Of course, sometimes dry material mixing is carried out during transportation to clean the system.

以上就是小編為大家介紹的關于混凝攪拌機車一直轉動的因素，希望能解答大家的疑惑，如需更多的關于混凝攪拌車的相關知識，請關注我們公司網站：http://www.gdfcx.net后續將呈現更多的精彩內容

The above is what Xiaobian introduced to you about the continuous rotation of the coagulation mixer. I hope to answer your doubts. If you need more knowledge about the coagulation mixer, please pay attention to our website: http://www.gdfcx.net More exciting content will be presented later