大家對于自動混凝土攪拌機肯定不會陌生,那么
自動混凝土攪拌機清洗的方法以及如何養護您了解多少呢?下面跟著小編一起看下吧!
We are certainly familiar with automatic concrete mixers. How much do you know about the cleaning methods and curing methods of automatic concrete mixers? Let's follow Xiao Bian to have a look!
自動混凝土攪拌機的清洗方法:
Cleaning method of automatic concrete mixer:
1.每次灌裝前用水沖洗進料口,以便在灌裝過程中保持進料口濕潤;
1. Before each filling, flush the feed inlet with water to keep it wet during the filling process;
2.在裝載的同時,將裝有車輛的洗滌水箱裝滿水;
2. When loading, fill the washing water tank containing the vehicle with water;
3.充電后沖洗進料口,清洗進料口附近殘留的混凝土;
3. After charging, flush the feed inlet and clean the residual concrete near the feed inlet;
4.在施工現場卸載后,沖洗排放槽,然后在全自動混凝土攪拌槽中加入30-40L清洗水;在車輛返回時保持混凝土儲罐緩慢旋轉;
4. After unloading at the construction site, flush the discharge tank, and then add 30-40L of cleaning water into the automatic concrete mixing tank; Keep the concrete tank rotating slowly when the vehicle returns;
5.在下次裝貨前,記得放下自動混凝土攪拌槽中的污水;
5. Before the next loading, remember to put down the sewage in the automatic concrete mixing tank;
6.每天清潔自動混凝土攪拌槽和工作周圍的進出口,確保沒有水泥和混凝土結塊。
6. Clean the automatic concrete mixing tank and the inlet and outlet around the work every day to ensure that there is no cement and concrete caking.
自動混凝土攪拌機養護要求:
Maintenance requirements of automatic concrete mixer:
1.混合器將定期清潔燃油系統,并控制積碳的產生,以使發動機保持狀態。
1. The mixer will regularly clean the fuel system and control the carbon deposition to keep the engine in good condition.
2.攪拌車使用適當質量等級的油。對于發動機,應根據進氣和排氣系統的附加設備和運行條件選擇SD-SF級發動機機油;柴油機應根據機械負荷使用CB-CD級柴油機油。選擇規格基于不少于制造商的規定。
2. The mixer truck shall use oil of appropriate quality grade. For the engine, SD-SF engine oil shall be selected according to the additional equipment and operating conditions of the intake and exhaust system; The diesel engine shall use CB-CD diesel engine oil according to the mechanical load. The selection of specifications is based on not less than the manufacturer's specifications.
3.攪拌機將定期更換機油和濾芯。在任何質量等級的操作過程中,油質都會發生變化。為防止問題的發生,應根據使用條件定期更換機油,并且機油量應適中(通常是油垢的上限)。
3. The oil and filter element of the mixer will be replaced regularly. During operation at any quality level, the oil quality will change. In order to prevent problems, the engine oil should be changed regularly according to the service conditions, and the amount of engine oil should be moderate (usually the upper limit of oil stain).
4.攪拌機堅持曲軸箱的良好通風。
4. The agitator shall keep the crankcase well ventilated.
This is all about the cleaning and maintenance requirements of the mixer. If you have any information about this, please come to our website http://www.gdfcx.net Ask and understand!