The full-automatic concrete mixer has been carefully debugged by the Engineer at the beginning of the construction of the re mixing plant, so the daily operation is relatively simple for the operator. Open the control panel of the concrete mixer, we can see many buttons. Here is the control system of the concrete mixer. As an operator, you need to clearly understand the function of each button and be able to do basic maintenance work.

下面就來講一下全自動混凝土攪拌機的具體操作步驟

Let's talk about the specific operation steps of the full-automatic concrete mixer

1、正確的開機順序，將支柱上的功能開關切換到自動擋，然后再按下啟動開關，這樣整個過程就可以自動運行了。

1. Correct startup sequence, switch the function switch on the pillar to automatic gear, and then press the start switch, so that the whole process can run automatically.

2、如果中途需要停止，要先按下停止，并等機器完全停止，需要運行時，重新啟動就行了。

2. If you need to stop halfway, you should first press stop and restart the machine when it needs to run.

3、混凝土攪拌機的顯示屏幕上會顯示時間，快慢速，停止等按鈕，相關的指示燈也會開始閃爍。

3. The display screen of the concrete mixer will display the time, fast, slow, stop and other buttons, and the relevant indicator lights will also start to flash.

4、攪拌工作完成后，將模式調回到手動模式，然后切斷電源開關。

4. After mixing, adjust the mode back to manual mode, and then cut off the power switch.

客戶在操作上須嚴格遵循這個操作步驟，保證混凝土攪拌機的平穩運行，既簡單又方便，

The customer must strictly follow this operation step to ensure the smooth operation of the concrete mixer, which is simple and convenient,

在混凝土攪拌站中，控制系統的電纜是與控制室連接的。除了JS混凝土攪拌機，其他配套設備也是在控制系統下完成的。維修人員在工作結束后還需要注意加注潤滑油、記錄設備磨損情況和完成清洗工作。

In the concrete mixing plant, the cable of the control system is connected with the control room. In addition to JS concrete mixer, other supporting equipment is also completed under the control system. Maintenance personnel shall also pay attention to filling lubricating oil, recording equipment wear and completing cleaning after work.