通過適當的維護，混凝土攪拌機可以使用很長時間。如果沒有適當的維護，它們可能會過早磨損。那么就來說說該攪拌機的維護技巧吧。

With proper maintenance, the concrete mixer can be used for a long time. Without proper maintenance, they may wear out prematurely. Then let's talk about the maintenance skills of the mixer.

定期檢查潤滑油液位并確保攪拌機中的運動部件得到適當潤滑，可以將攪拌機的使用壽命延長數年。這是需要牢記的重要的通用攪拌機維護技巧之一，而且易于保養。

Regularly checking the lubricating oil level and ensuring that the moving parts in the mixer are properly lubricated can prolong the service life of the mixer for several years. This is one of the important general mixer maintenance skills to keep in mind, and it is easy to maintain.

攪拌機密封件將配料保持在攪拌器中，并保護軸的運動。如果密封件損壞，材料會溢出或軸的對中可能會發生偏移。有許多不同類型的攪拌機密封件，每種攪拌機的很好的維護技巧將取決于您的機器。

The mixer seal keeps the ingredients in the mixer and protects the movement of the shaft. If the seal is damaged, the material will overflow or the alignment of the shaft may deviate. There are many different types of mixer seals, and the good maintenance skills of each mixer will depend on your machine.

隨著時間的推移，灰塵、污垢、粉末或異物可能會滯留在卸料門中，導致卸料門無法完全關閉。檢查限位開關以確保在使用限位開關時閘門完全關閉或打開。

Over time, dust, dirt, powder or foreign matter may remain in the discharge door, causing the discharge door to not be fully closed. Check the limit switch to ensure that the gate is fully closed or open when the limit switch is used.

操作過程中觀察卸料門，確保其正確打開和關閉。如果閘門沒有完全打開，可能會導致材料留在攪拌機中。如果門沒有完全關閉，材料會泄漏。

Observe the discharge door during operation to ensure that it is opened and closed correctly. If the gate is not fully opened, it may cause the material to remain in the mixer. If the door is not fully closed, material will leak.

攪拌機的機身也是正確維護配料系統攪拌機的重要組成部分。無論您使用的是什么類型的攪拌機，如果攪拌器離墻壁太近，可能會損壞機器的主體。異物，例如金屬碎片或小石塊，也會在攪拌器運行時損壞攪拌器。

The body of the mixer is also an important part of correctly maintaining the mixer of the batching system. No matter what type of mixer you use, if the mixer is too close to the wall, it may damage the main body of the machine. Foreign objects, such as metal fragments or small stones, can also damage the agitator while the agitator is running.

隨著時間的推移，軸可能會移動，導致混合器葉片移動得太近或太遠離浴缸。這不僅會損壞混合器，還會將金屬碎片引入混合物中，并破壞整個混合操作。

Over time, the shaft may move, causing the mixer blades to move too close or too far from the bathtub. This will not only damage the mixer, but also introduce metal fragments into the mixture and disrupt the whole mixing operation.

請記住，攪拌機的設計是為了很好地滿足您的配料需求——如果攪拌機組件沒有正確對齊，它將無法正確混合。如果您聽到刮擦聲或攪拌器過度振動，則可能是軸未對齊并且葉片太靠近浴缸。

Remember that the mixer is designed to meet your batching needs well - if the mixer components are not aligned correctly, it will not mix correctly. If you hear scraping or excessive vibration of the mixer, the shaft may not be aligned and the blades are too close to the bathtub.

當配料進入混凝土攪拌機時，干預措施允許排出的空氣逸出。這些干預措施很容易被灰塵堵塞。定期清潔它們，讓空氣逸出，讓您的配料輕松進入攪拌機。如果空氣無法通過干預措施逸出，則干燥的材料會在通過其他出口逸出時產生塵埃云。粉塵會帶來火災和爆炸的風險。

When the ingredients enter the concrete mixer, the intervention allows the exhaust air to escape. These interventions are easily blocked by dust. Clean them regularly, let the air escape, and let your ingredients easily enter the mixer. If the air cannot escape through the intervention, the dry material will produce dust clouds when escaping through other outlets. Dust poses a risk of fire and explosion.

此外，還要考慮更換或維修保養不當的攪拌機所需的時間、和精力。比較兩者時，留出維護時間總是更快、更便宜、更容易。更多內容就來網站www.gdfcx.net咨詢吧。

In addition, the time, money and energy required to replace or repair the mixer with improper maintenance should also be considered. When comparing the two, it is always faster, cheaper and easier to set aside maintenance time. For more information, please visit www.gdfcx.net Consult. Com.