小型攪拌機使用范圍相當廣泛，可攪拌多種混合物。除此之外可根據客戶使用情況靈活定制，規格型號參數可隨客戶需求多變，以滿足攪拌作業需求。但是為了確保設備以及人員的，有幾個不攪拌的原則。

Small mixers are widely used and can stir a variety of mixtures. In addition, it can be flexibly customized according to the use situation of customers, and the specifications, models and parameters can be changed with the needs of customers to meet the needs of mixing operation. However, in order to ensure the safety of equipment and personnel, there are several principles of non mixing.

1、不攪拌質地堅硬有明顯棱角；

1. Without stirring, the texture is hard and has obvious edges and corners;

2、不攪拌具有濃度較高酸堿等其他腐蝕性化學物質；

2. Do not stir other corrosive chemicals with high concentration of acid and alkali;

3、不攪拌顆粒較大質量較大且堅硬混合物；

3. Do not stir the mixture with large particles, large mass and hard;

4、不超載攪拌使用；

4. No overload mixing;

以上小型攪拌機“四不攪拌原則”前三條是為了保護滾筒式小型攪拌機其滾筒嚴重損壞，影響使用時間。小型攪拌機使用不超載則是保護小型攪拌機電機。長期超載使用，電機處于負載狀態，長此以往電機必將受損需更換電機，電機是小型攪拌機動力輸出元件屬于“心臟”部件。

In order to protect the small mixer from serious drum damage, there are more than three principles. If the small mixer is not overloaded, it is to protect the motor of the small mixer. If the motor is overloaded for a long time, the motor will be in the load state. In the long run, the motor will be damaged and needs to be replaced. The motor is the power output element of a small mixer and belongs to the "heart" component.

此外，日常工作開始時，應仔細檢查各部件是否有異常，開車前檢查離合器、制動器及各種保護裝置是否靈敏可靠。鋼絲繩是否損壞，軌道和滑輪是否完好，機體是否穩定，周邊是否有故障，確認無問題后，方可試車關閉。運行正常無異響后，正式進行生產運行。

In addition, at the beginning of daily work, carefully check whether all parts are abnormal, and check whether the clutch, brake and various protective devices are sensitive and reliable before driving. Whether the steel wire rope is damaged, whether the track and pulley are in good condition, whether the machine body is stable and whether there are faults around. The commissioning can be closed only after confirming that there are no problems. After the operation is normal and there is no abnormal sound, the production operation is officially carried out.

機器啟動后，司機必須專心工作，不得擅自離開崗位，必須隨時注意機器的運行情況。如發現異?，F象或聽到異響，必須將罐內物料放出。檢查和修理。攪拌機運行時，嚴禁維修保養，嚴禁使用工具伸入罐內取料。

After the machine is started, the driver must concentrate on his work, shall not leave the post without authorization, and must pay attention to the operation of the machine at any time. If abnormal phenomena are found or abnormal noises are heard, the materials in the tank must be discharged. Inspection and repair. When the mixer is running, it is strictly prohibited to maintain it, and it is strictly prohibited to use tools to stretch into the tank for reclaiming.

料斗提升時，嚴禁在料斗下方工作或通過。當需要清理料斗的基坑時，必須提前聯系司機，并用鉤將料斗牢牢掛好后才能進行。檢修攪拌機時，必須切斷電源。如需進滾筒檢修，必須在開關盒上掛上“禁止合閘”的木牌，并有專人看管。保證避免意外供電事故的發生。

When the hopper is lifted, it is strictly prohibited to work or pass under the hopper. When it is necessary to clean the foundation pit of the hopper, the driver must be contacted in advance and the hopper can be cleaned only after it is firmly hung with a safety hook. When repairing the mixer, the power supply must be cut off. If it is necessary to enter the drum for maintenance, a wooden sign of "no switching on" must be hung on the switch box and supervised by a specially assigned person. It is absolutely guaranteed to avoid accidental power supply accidents.

小型攪拌機確保有“不攪拌”原則的內容便是這樣了，當然定期的保養維修工作是保證作業期間不出問題的基礎，要做好。更多相關內容就來網站www.gdfcx.net看看吧。

This is the content of the principle of "no mixing" to ensure the safety of small mixers. Of course, regular maintenance is the basis to ensure no problems during operation, which should be done well. For more information, please visit www.gdfcx.net Check it out. Www. 68mn.